-
With angled ceiling wardrobe brackets, you can install sliding doors beneath eaves.
Make the most of your space with our easy to follow installation guide.
-
Position the upper brackets by measuring the height of the door and add the total
length of the bracket (95mm).
-
Make sure that the bracket is approximately 610mm away from the back wall.
-
Mark the height you want your brackets to be along the height of the ceiling.
-
Ensure even spacing for each bracket or refer to our guide image below:
-
To fix the bracket onto a plasterboard surface, use the plugs and screws provided.
For any other type of of surface and substrate, consult a tradesperson for guidance
— or take a look at our helpful guide to fixings.
-
Mark the centre point on the ceiling with a pencil then insert the screws at opposite points,
one on each side.
-
Fix the upper bracket to the lower bracket. Insert the nut and bolt as shown.
-
Fix the upper track at the point shown then rotate the track into position.
-
You might need to make some final adjustments once the bracket is in place.
The maximum space for adjustment is 12mm. You can use a spanner to adjust the fixing
if needed. It’s also important to double check your opening height on the top track.
-
Fix the fascia at the points shown.