Fitting Wall Liners & Floor Liners To A Sliding Wardrobe Door

Enjoy a storage solution that fits your space seamlessly with wardrobe wall liners. Our wall liners can be adjusted to fit any space. Find out how to fit them from our simple guide. 

You’ll need the following: 

Before starting, ensure that you have checked for any electrical wires or water pipes and avoid screwing near these fittings. 

Make sure that you are using the correct fixing for the surface you’re working on. If you need some guidance on this, take a look at our guide to fixings or speak to a qualified tradesperson.

How To Fit Wall Liners

1. Mark the depth of your wardrobe on each side of the opening.

2. Now measure the height of your opening on each side of the wardrobe.

3. Mark the length at each side of each liner and draw a line across the width of the liner. Now cut the liners across the marked line using a wood saw.

4. Position the liners up against your walls where the wardrobe is going to be.

5. If required, mark & cut the skirting boards where the liners will be positioned.

6. Mark and drill holes at 4 (minimum) equally spaced holes in the liner.

7. Using a spirit level, ensure the liners are vertical. If required, pack out the liner between the wall and liner.

8. Now mark and drill the holes for your desired fixings in the wall.

9. Fix the wall liners in position, then if required use decorators caulk to fill the gaps between the liner and walls to give a premium finish.

How To Fit Floor Liners

1. To fit the floor liner(s), measure the width of the opening at floor level inside the two wall liners. 

2. Mark the length at each side of the liner and draw a line across the width of the liner. Now cut the liner as previously. 

3. Mark and drill pilot holes, then use equal spacing and do the same along the rest of the length. 

4. Using suitable fixings, secure the liner/s to the floor. If you need guidance on what kind of fixing is necessary for the surface you’re working with, take a look at our guide to fixings.